Siganor
Contact
← Siganor Learn

Write your first ladder rung with XIC and OTE

A light switch turns on a lamp. In ladder logic, an XIC contact reads the switch and an OTE coil drives the lamp. This video writes that rung in the Siganor Simulator, step by step.

My first lamp

From a light switch at home to your first rung: a contact reads Switch, a coil writes Lamp, and you test it in the simulator.

  1. 0:28Close the circuit: closing the switch lets current flow
  2. 0:38From switch to lamp: input, PLC, output
  3. 0:48XIC reads the Switch bit: false at 0, true at 1
  4. 0:59OTE writes the Lamp bit: the output follows the rung condition
  5. 1:10Open rung 0: Edit, Edit rungs, double-click
  6. 1:20Insert XIC and enter Switch as the tag
  7. 1:28Insert OTE, enter Lamp and click Accept
  8. 1:37Click Run and open the Simulator tab
  9. 1:45Set Switch to 1: Lamp changes to 1

What you’ll learn

  • Use an examine-if-closed contact (XIC) to read an input bit.
  • Drive an output bit with an output coil (OTE).
  • Test the rung in the Simulator tab by changing the input.